Skip to content

Century Heating CW2100 Fireplace Insert CB00027

SKU CB00027
Save 30% Save 30%
Original price $1,999.00
Original price $1,999.00 - Original price $1,999.00
Original price $1,999.00
Current price $1,399.00
$1,399.00 - $1,399.00
Current price $1,399.00

CW2100 Wood insert

  • Tapered shape (top and sides) designed to fit the smallest masonry hearths
  • Flush blower for a clean look, with left/right power cord
  • Lightweight steel faceplate with hooks that snap onto the front of the unit
  • Moulded high density refractory panels on the bottom of the appliance and grey bricks on the sides
  • Reinforced appliance top with a stainless steel heat shield
  • Cast iron door and ceramic glass
  • EPA certified at 1.5 g/h 
  • Non-catalytic combustion system
  • Designed and made in Canada
  • Included: 26" x 42" faceplate, air intake damper and 110 CFM blower with thermodisc 
Recommended heating area 250 - 1,200 ft²
Maximum heat output-dry cordwood 45,000 BTU/h
Dimensions 27 7/8" W X 21 7/8" D X 20 1/8" H
Maximum log length 17" (16" recommended)
Average particulate emission rate 1.5 g/h



Wood insert manual | Safety notifications & general information PDF to download
Installation and user’s manual PDF to download
Appliance dimensions PDF to download


Appliance performance(2)

Fuel type Dry cordwood
Recommended heating area(3) 250 - 1,200 ft²
Overall firebox volume 1.1 ft³
EPA loading volume 1.03 ft³
Maximum burn time(3) 7 h
Maximum heat output-dry cordwood(4) 45,000 BTU/h
Minimum overall heat output rate(4) (5) 8,471 BTU/h (2.48 kW)
Maximum overall heat output rate(4) (5) 31,700 BTU/h (9.29 kW)
Average overall efficiency-dry cordwood (HHV)(5) (6) 75%
Average overall efficiency-dry cordwood (LHV)(5) (7) 80%
Optimum efficiency(8) (9) 82%
Optimum heat transfer efficiency(11) 78%
Average particulate emission rate(1) 1.5 g/h
Average CO(10) 34 g/h
  • This appliance is officially tested and certified by an independent agency.
  • Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.
  • Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
  • The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
  • As measured per CSA B415.1-10 stack loss method.
  • Higher Heating Value of the fuel.
  • Lower Heating Value of the fuel.
  • Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
  • Optimum overall efficiency at a specific burn rate (LHV).
  • The optimum heat transfer efficiency is for the low burn rate and represents the appliance’s ability to convert the energy contained in the wood logs into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
  • Carbon monoxyde.

General features

Mobile home approved No
Premium quality blower included (CFM) 110 CFM included
Certified according to applicable standards CAN/USA accredited laboratory
Combustion technology Non-catalytic
Stainless-steel secondary-air system Yes
Flue outlet diameter 6"
Recommended chimney diameter 6"
Type of chimney CAN/ULC S629, UL 103 HT (2100 °F)
Minimum chimney height 12"
Overall dimension (Width) 27 7/8"
Overall dimension (Height) 20 1/8"
Overall dimension (Depth) 21 7/8"
Door type Single, glass with cast iron frame
Door opening size (Width) 18 1/4"
Door opening size (Height) 7 7/8"
Glass type Ceramic glass
Glass surface - W x H 17 3/8" x 8 1/8"
Steel thickness-body 3/16"
Steel thickness-top 3/16"
Firebox size (Width) 16 3/4"
Firebox size (Height) 8 3/4"
Firebox size (Depth) 12 3/8"
Maximum log length 17" (16" recommended)
Log positioning Loading over width
Baffle type C-Cast or equivalent
Minimum fireplace opening (Width) 25"
Minimum fireplace opening (Height) 19"
Minimum fireplace opening (Depth) 15 1/2"
High-efficiency certified appliance Yes, EPA 2020 approved
Canadian Standard (emissions) CSA B415.1-10
USA Standard (emissions) EPA
Canadian Standard (safety) ULC S628
USA Standard (safety) UL 1482, UL 737
Warranty Limited 5 years
Shipping weight 282 lb (kg)


Minimum clearances to combustibles*

(Data expressed in inches. 1 inch = 25.4 mm)

Canada United-States
Clearances - Base of the unit to ceiling ** 72" 72"
Clearances - Combustible top mantle to unit 34" 34"
Clearances - Combustible side wall to unit 16" 16"

* The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).

** Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.